MATERIAL
SAFETY DATA SHEET
Supplied by:
Poly Lam Products, Corp
80 Earhart Drive
Williamsville, New York 14221
ph: 716-633-1977 toll free: 800-836-9648
Fax: 716-633-2007
EMERGENCY
PHONE NO.: CHEMTREC (FOR SPILL, LEAK, FIRE, EXPOSURE OR ACCIDENT):
1-800-424-9300 (DAY OR NIGHT)
*
* * * * * * * * * * * * * * * M-370 C * * * * * * * * * * * * * * * * * *
SECTION
I - PRODUCT IDENTIFICATION
PRODUCT
NAME: M-370
C
PRODUCT
DESCRIPTION: Proprietary water-based corrosion inhibitor coating.
SECTION
II - HAZARDOUS INGREDIENTS
INGREDIENT
NAME(S) |
WEIGHT
(%) |
OCCUPATIONAL
EXPOSURE LIMITS |
|
TLV
OR PEL |
ORAL
LD-50 |
Salt
of tall oil fatty acid |
<15 |
N.E. |
N.E. |
Carcinogenic: OSHA = no NTP = no IARC = no
SECTION
III - PHYSICAL DATA
COLOR:
Clear dark brown
PHYSICAL
FORM: Slightly viscous liquid
NON-VOLATILE
(weight): 60-65% MELTING RANGE: N.A.
ODOR:
Ammoniacal pH: 8-9 (Neat)
FREEZING
POINT: N.E. BOILING RANGE: N.E.
VAPOR
DENSITY: N.E. VAPOR PRESSURE: N.E.
EVAPORATION
RATE: N.E.
DENSITY:
8.6-8.7 lb/gal (1.03-1.04 kg/l)
SECTION
IV - FIRE AND EXPLOSION DATA
HMIS
FLAMMABILITY RATING: 1
FLASH
POINT: >120ºC
FLAMMABLE
LIMITS: LEL: N.E. UEL:
N.E.
EXTINGUISHING
MEDIA: Water, carbon dioxide, foam, or other dry chemical fire fighting agents.
UNUSUAL
FIRE AND EXPLOSION HAZARDS: Can form explosive mixtures at temperatures above flash point (>120ºC
/ 250ºF)
SPECIAL
FIRE FIGHTING PROCEDURES: Firefighters should wear self contained breathing apparatus and
full protective gear.
SECTION
V - HEALTH HAZARD DATA
EMERGENCY
AND FIRST AID PROCEDURES:
Eye
Contact:
Flush eyes with water for at least 15 minutes. Consult
a physician. Skin Contact: Wash affected area with soap and water. If irritation persists, consult a physician. Inhalation: Remove
to an uncontaminated area, administer oxygen if necessary. If victim has stopped breathing
begin CPR. Get medical attention. Ingestion:
If conscious, give large quantities of water. Do not induce vomiting.
MEDICAL
CONDITIONS PRONE TO AGGRAVATION BY
EXPOSURE:
None known
PRIMARY
ROUTES OF ENTRY: Inhalation, skin and eye contact.
HEALTH
HAZARDS (acute and chronic) / EFFECTS OF OVEREXPOSURE:
1. Eye contact with this material causes irritation and
possible damage unless prompt first aid measures area taken.
2. Prolonged or repeated skin contact with this material can
cause irritation, redness or rash due to the alkaline nature of this product. Person sensitized by contact with product may develop an
allergic reaction.
3. Ingestion of this product is not likely to cause harmful
effect.
4. Aspiration of swallowed liquid may cause damage of lungs.
SECTION
VI - REACTIVITY DATA
STABILITY:
Stable
HAZARDOUS
POLYMERIZATION: Will not occur.
HAZARDOUS
DECOMPOSITION PRODUCTS: Oxides of carbon and nitrogen.
INCOMPATIBILITY:
Strong oxidizing of reducing agents.
CONDITIONS
TO AVOID: Contact with incompatible materials.
SECTION
VII - SPILL OR LEAK PROCEDURES
STEPS
TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Absorb on sweeping compound or other
absorbent material. Place in closed container for
disposal.
WASTE
DISPOSAL: Incinerate or dispose of in accordance with existing Federal, State and Local
environmental regulations.
SECTION
VIII - SAFE HANDLING AND USE INFORMATION
RESPIRATORY
PROTECTION: If product is sprayed, use a
combination vapor-dust/mist or dust/mist respirator.
PROTECTIVE
GLOVES: Chemical resistant rubber or plastic.
EYE
PROTECTION: Chemical splash goggles.
OTHER
PROTECTIVE EQUIPMENT: Not required.
SECTION
IX - SPECIAL PRECAUTIONS AND STORAGE DATA
PRECAUTIONS
TO BE TAKEN IN HANDLING: Avoid eye and prolonged skin contact. Use in a well-ventilated environment.
PRECAUTIONS
TO BE TAKEN IN STORING: Keep containers tightly closed.
SECTION
X - SHIPPING DATA
DOT/IMDG/IATA
SHIPPING NAME: N.A.
UN/NA
NUMBER: N.A.
DOT/IMDG/IATA
HAZARD CLASS.: N.A.
T.S.C.A.
STATUS: Listed
DOT/IMDG/IATA
REQUIRED LABELS: N.A.
TECHNICAL
SHIPPING NAME: N.A.
PREPARED
BY: Alla Furman, Sr. Corrosion Engineer
APPROVED
BY: Margarita Kharshan, Laboratory Director
DATE
PREPARED: 8/29/01 SUPERSEDES: 8/18/00
DISCLAIMER: This information is furnished without warranty,
expressed or implied, except that it is accurate to the best knowledge of the Cortec
Corporation. The data on this sheet relates only to
the specific material designated herein. The Cortec
Corporation assumes no legal responsibility for use or reliance upon this data.
N.E.
= NOT ESTABLISHED N.A. = NOT APPLICABLE
